Fasya Oluk Rulo Şekillendirme Makinesi

A fascia gutter roll forming machine is an industrial piece of equipment that feeds continuous flat metal coils through a series of hardened steel rollers to progressively shape the metal into a specific fascia gutter profile. These gutters serve a dual purpose, acting as both the roof’s gutter system and the fascia board.

Most standard fascia gutter roll forming machines can process a variety of metals, including:

• Pre-painted or galvanized steel

• Alüminyum

• Copper

• Zinc Typical material thickness ranges from 0.3mm to 0.8mm (or 22 to 30 gauge), depending on the specific machine’s design.

While speeds vary by manufacturer and model, a standard fascia gutter roll forming machine typically operates at a speed of dakikada 10 ila 20 metre (approx. 30 to 65 feet per minute). This speed includes the time it takes for the machine to stop, cut the gutter, and resume forming.

This depends on the machine type.

• Single-profile machines: Designed to produce one specific fascia gutter size and shape.

• Adjustable/Multi-profile machines: Can be adjusted manually or automatically to produce different widths, or they may use interchangeable cassette systems to swap out entire roller sets for completely different profiles.

To ensure longevity and consistent profile quality, operators should:

• Keep the rollers clean and free of metal shavings or debris.

• Regularly lubricate the drive chains, gears, and bearings.

• Check the hydraulic oil levels for the cutting system.

• Inspect the cutting blades for wear and sharpen or replace them when necessary.

Yes. Most roll forming machine manufacturers custom-build the roller dies based on a dimensioned profile drawing or a physical sample provided by the buyer.

Fascia gutter machines come in two main types:

• Factory/Stationary Machines: Heavier, faster, and designed for high-volume in-house manufacturing.

• Portable Seamless Gutter Machines: Lighter, more compact, and designed to be mounted inside a trailer or truck to run continuous, seamless gutters directly at the residential or commercial job site.

Because the rollers are often custom-machined to match your specific profile, manufacturing the machine usually takes between 45 ila 60 gün, plus shipping time.